Whole machine parameters number | Machine model | HS-3 | HS-3L | HS-3T |
Drilling depth (m) | 100, 250, 300, 600 | 100, 250, 300, 600 | 100, 250, 300, 600 |
Hole diameter (mm) | three hundred and twenty-five | three hundred and twenty-five | three hundred and twenty-five |
Corresponding final hole diameter (mm) | 325, 200, 150, 75 | 325, 200, 150, 75 | 325, 200, 150, 75 |
Drilling inclination angle (°) | 90-65 | 90-45 | ninety |
Supporting power (kW) | Yunnei YN27/42 | Yunnei YN27/42 | Yunnei YN27/42 |
Weight (kg) | one thousand and eight hundred | six thousand and two hundred | three thousand and six hundred |
Drilling rig dimensions: length * width * height (m) | 2.6*0.9*1.75 | 4.5*2*2.7 | 3.8*2.56*3.3 |
a vertical scroll of painting | Vertical shaft speed (r/min) | Low speed 30, 53, 88, 145, 222 | Low speed 30, 53, 88, 145, 222 | Low speed 30, 53, 88, 145, 222 |
Highways 143, 250, 414, 684, 1050 | Highways 143, 250, 414, 684, 1050 | Highways 143, 250, 414, 684, 1050 |
Vertical axis travel (mm) | six hundred | six hundred | six hundred |
windlass | Single rope lifting force (kg) | three thousand | four thousand and five hundred | three thousand |
Single rope lifting speed (m/s) | 0.3-1.9 | 0.3-1.9 | 0.3-1.9 |
Diameter of steel wire rope (mm) | φ12.5 | φ12.5 | φ12.5 |
Capacity of steel wire rope (m) | sixty-five | sixty-five | sixty-five |
Derrick | Rated load (ton) | 18 (optional) | eighteen | eighteen |
Effective height (m) | nine point six | six point five | six point five |